Discountable price Plastic Pillar Mould - Car engine air body turbocharger – Bolok Mold
Discountable price Plastic Pillar Mould - Car engine air body turbocharger – Bolok Mold Detail:
| Part Name | Car engine air body turbocharger |
| Product Description | Low-cost rapid prototyping mold, the production cycle is 4 weeks. Arc slider pulling on both sides by hydraulic motor,Straight slider and arc slider secondary pulling,The slider insert is made of beryllium copper, which is cooled quickly to ensure the center of the product. |
| Export country | Germany |
| Product Size | 350X100X150mm |
| Product weight | 236g |
| Material | Zytel 70G30 HSLR Black |
| Finishing | Industrial polish |
| Cavity Number | 1 |
| Mold standard | Metric |
| Mold Size | 450X650X440mm |
| Steel | 718H |
| Mold life | Prototype mold |
| Injection | Cold runner direct on part |
| Ejection | Ejection pin |
| activity | 2 Sliders |
| Injection cycle | 55S |
| Product Features and Application | High-performance engineering plastic pipe instead of aluminum piping or stainless steel to reduce the effects of heat soak and mandrel bends for the best flow.heat dissipation for a long lifetime,Connecting, sealing and transporting.piping is in proper condition, free of cracks and tears |
| Detail | A turbocharger, comprising a driving force of the actuator mechanism to transfer within the turbine housing and a drive shaft rotatably supported by the shaft sleeve, the outside air side end portion of the sleeve with a sealing pieces.The seal includes a seal body made of resin and the embedded metal body of the seal spring recess, the elastic force of the spring by the inner lip seal body is pressed against the inner peripheral surface of the drive shaft.Further, on the end face of the seal body is formed in advance can be provided on the outside air side of the drive shaft member (drive link) of the contact. |
Use
The main function of turbocharging is to increase the air intake of the engine, so as to improve the power and torque of the engine and make the vehicle more powerful. The working principle of turbocharging is: the exhaust gas discharged from the engine exhaust outlet is used as the power to drive the impeller in the turbine chamber. At the same time, the impeller is directly connected with the booster wheel in the booster chamber. One end of the booster chamber is connected with the steam filter, and the other end presses the air sucked from the steam filter into the cylinder of the engine, so as to increase the air in the engine.
Product detail pictures:
Related Product Guide:
With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for our clients for Discountable price Plastic Pillar Mould - Car engine air body turbocharger – Bolok Mold , The product will supply to all over the world, such as: Iraq, Mozambique, Juventus, We have more than 200 staff including experienced managers, creative designers, sophisticated engineers and skilled workers. Through hard work of all employees for the past 20 years own company grew stronger and stronger. We always apply the "client first" principle. We also always fulfill all contracts to the point and therefore enjoy excellent reputation and trust among our customers. You are very welcome to personally visit our company.We hope to start a business partnership on the basis of mutual benefit and successful development . For more information please do no hesitate to contact us..
By Page from Florence - 2017.08.18 18:38
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Murray from Cambodia - 2018.09.23 17:37
Write your message here and send it to us
