China Gold Supplier for Thermo Moulding - SMALL AUTOMOBILE AIR BODY TURBOCHARGER – Bolok Mold

Short Description:

Product Detail

Product Tags

Feedback (2)

Our firm sticks on the theory of "Quality will be the life in the enterprise, and status could be the soul of it" for front-driver-side-door interior -trim -panel , Cavity In Injection Molding , Plastic Injection , We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

China Gold Supplier for Thermo Moulding - SMALL AUTOMOBILE AIR BODY TURBOCHARGER – Bolok Mold Detail:

Part Name	AIR BODY TURBOCHARGER
Product Description	Low-cost rapid prototyping mold, the production cycle is 4 weeks. Arc slider pulling on both sides by hydraulic motor,Straight slider and arc slider secondary pulling,The slider insert is made of beryllium copper, which is cooled quickly to ensure the center of the product.
Export country	Germany
Product Size	350X100X150mm
Product weight	236g
Material	Zytel 70G30 HSLR Black
Finishing	Industrial polish
Cavity Number	1
Mold standard	Metric
Mold Size	450X650X440mm
Steel	718H
Mold life	Prototype mold
Injection	Cold runner direct on part
Ejection	Ejection pin
activity	2 Sliders
Injection cycle	55S
Product Features and Application	High-performance engineering plastic pipe instead of aluminum piping or stainless steel to reduce the effects of heat soak and mandrel bends for the best flow.heat dissipation for a long lifetime,Connecting, sealing and transporting.piping is in proper condition, free of cracks and tears
Detail	Centrifugal compressor and turbine are combined into a whole, which is called turbocharger. The main difference between it and gas turbine is that the unit is not equipped with combustion chamber and corresponding system. The turbine works by using the exhaust energy of reciprocating internal combustion engine, and the compressed air provided by its centrifugal compressor is used as the charge of reciprocating internal combustion engine. In the turbocharger, the compressor impeller and turbine are assembled on the same rotating shaft, which is called rotor. There are seals and thrust plates placed on the same rotor shaft and rotating together.Rotor is the key component of turbocharger. In addition, the turbocharger also includes bearing device, lubrication and cooling system, sealing and heat insulation device, compressor housing, intermediate housing, turbine housing and other fixings necessary for normal operation.This product is a Prototype mold, It can help factories produce products quickly and at low cost.

Mold Type

This product is a Prototype mold, It can help factories produce products quickly and at low cost.

What is Prototype mold？

Prototype mold is a term familiar to most designers and manufacturers because it is related to the process of turning a concept into reality. Usually, when industrial or product designers have a concept of a product, they will go through various stages, from a simple idea to a more realistic concept, and express the product with tangible things, which represents the appearance of the product after manufacturing. Although the prototype mold is used to create a representative object, which fully reflects the designer’s ideas, it is different from the prototype mold in the sense of production mold, which is far lower than the cost and permanence of production mold. With the emergence of 3D printers, some types of prototype molds have become obsolete. The way the prototype mold is created allows any further modifications to the product, because the prototype mold is only used when the product is still fine tuned. For example, a designer has a concept of a table lamp. He will first use a mold to see what the finished product will look like. At this stage, the designer can add any additional decoration to the product to make it conform to the concept of the product. Assuming that the sample results of the prototype die are not satisfactory, the designer will modify the die several times to produce something more like the designer’s mind. This is different from the production mold, because the production mold is used for mass production and lasts longer than the prototype mold, because at this point, the goal is not so. Fine tuning the design rather than putting it into full production. One of the reasons why designers choose to use the prototype mold before using the production mold is the complexity of the concept, This may require a lot of attention to detail to achieve the design. The prototype design phase will consist of several progressive steps until satisfactory results are obtained. According to the complexity of the design, some designers can create their own molds or hire the services of prototype developers.

Product detail pictures:

Related Product Guide:

Our growth depends around the superior machines, exceptional talents and consistently strengthened technology forces for China Gold Supplier for Thermo Moulding - SMALL AUTOMOBILE AIR BODY TURBOCHARGER – Bolok Mold , The product will supply to all over the world, such as: Estonia, Slovenia, venezuela, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.

Abc Plastic Moulding